Aerol S8 and R8 Series Casters 

The Aerol S8 swivel and R8 rigid series industrial casters feature a maximum load capacity of 2,100 pounds. They are commonly used for transporting heavy aircraft components, jet engine stands, and military cargo handling units and ground support equipment. They feature a maintenance-free, permanently sealed caster unit lubricated for life, and the rig contains a sealed ball bearing and tapered roller bearing for handling both direct and side loads.

S8 Series Casters – 2,100 Lbs. Max Capacity – 5.88 x 6.75 Top Plate

Construction: 353 T6 Aluminum

Load Range: 150-1,280 lbs.

Speed: Max caster load rating @ 5 mph 1,200lbs.

Wheel Diameter: 8 inches

Available Wheels: Rubber, Aerolast, Zero Pressure, Plastic, FOD-resistant, Penumatic

Axle: ½ inch diameter, zinc plated, fine threads.

Overall Height: 11.06

Finish: Anodized, wet paint and powder coat paint are optional

R8 Series Casters – 2,100 Lbs. Max Capacity – 5.88 x 6.75 Top Plate

Construction: 353 T6 Aluminum

Load Range: 150-1,280 lbs.

Speed: Max caster load rating @ 5 mph 1,200lbs.

Wheel Diameter: 8 inches

Available Wheels: Rubber, Aerolast, Zero Pressure, Plastic, FOD-resistant, Penumatic

Axle: ½ inch diameter, zinc plated, fine threads.

Overall Height: 11.06

Finish: Anodized, wet paint and powder coat paint are optional

S8 Series Casters – 2,100 Lbs. Max Capacity – 5.88 x 6.75 Top Plate

Construction: 353 T6 Aluminum

Load Range: 150-1,280 lbs.

Speed: Max caster load rating @ 5 mph 1,200lbs.

Wheel Diameter: 8 inches

Available Wheels: Rubber, Aerolast, Zero Pressure, Plastic, FOD-resistant, Penumatic

Axle: ½ inch diameter, zinc plated, fine threads.

Overall Height: 11.06

Finish: Anodized, wet paint and powder coat paint are optional

R8 Series Casters – 2,100 Lbs. Max Capacity – 5.88 x 6.75 Top Plate

Construction: 353 T6 Aluminum

Load Range: 150-1,280 lbs.

Speed: Max caster load rating @ 5 mph 1,200lbs.

Wheel Diameter: 8 inches

Available Wheels: Rubber, Aerolast, Zero Pressure, Plastic, FOD-resistant, Penumatic

Axle: ½ inch diameter, zinc plated, fine threads.

Overall Height: 11.06

Finish: Anodized, wet paint and powder coat paint are optional

Benefits:

• Larger wheels better suited to move heavier equipment, providing better rollability

• Easier movement over floor joints, debris and surface irregularities that a smaller wheel

• Constructed to rigorous AS9100D and Mil-spec standards

• Sealed tapered roller bearings. Requires zero maintenance.

• 100% duty cycle outdoor use

Applications:

• Munitions-handling equipment

• Proven use in extreme environmental conditions such as ground support

• Shipboard and navel equipment

• Large aircraft tooling and maintenance stands